If not, repeat this process using the next code listed for your brand. If the device responds as expected, setup is complete. The INPUT KEY will blink twice to confirm once complete.

Enter the 1st code listed for your brand.

Ensure that your TV and/or audio device is powered-on.

For faster setup, be sure to locate your device brand in the code list before beginning setup. This step covers setup for all TV and Audio brands. NOTES: While holding the digit key, the remote will test for the working IR code, causing the INPUT key to flash each time it tests a new code. Show remote pointed at TV, transmitting data and TV is off

Release the digit key when the TV turns off.

Find your TV brand in the chart below and note the digit that relates to your TV brand.

Show remote with MENU and OK keys highlighted

Simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice.

If your brand is not listed, please proceed to SETUP USING DIRECT CODE ENTRY This step covers setup for the most common TV brands. Show remote with MENU and 3 keys highlighted Programming Your Remote for TV and Audio Control

Press and hold MENU and the 3 digit key simultaneously until the INPUT key blinks twice.

If your cable box is branded Cisco, Scientific Atlanta, or Samsung:.

Show remote with MENU and 3 keys highlighted

Press and hold MENU and the 2 digit key simultaneously until the INPUT key blinks twice.

If your cable box is branded Motorola, Arris, or Pace:.

If the cable box responds, skip this step and proceed to PROGAMMING YOUR REMOTE FOR TV AND AUDIO CONTROL. Point your remote at your cable box and press MENU to test. If you have a WorldBox, refer to the section above for remote pairing, following the on-screen instructions for any other remote programming.

This section is for any cable box that is NOT a Charter WorldBox. Programming Your Remote for Any Other Cable Box

Watch spectrum macbook pro user guide